Download Firmware Fiberhome An5506 04

I did all that but it still would not connect to the internet.Firstly I connected the Devolo ethernet connection to the wireless router.The Devolo wireless signal was being picked up so I went into cockpit and changed the SSID, and took the password off, just like my wireless settings.When I looked for a signal on the iMac and my IPad, I could find the signal for the wi-fi but it won't connect to the internet on any of the devices.I'm stumped as to what I'm doing wrong. Devolo wsr avb 001 drivers for mac.

EPCOM: AN5506-04-FS-FIBERHOME - ONT/ONU for FTTH/GPON Applications with 4 Gigabit Ethernet Ports, WiFi 2.4 GHz MIMO 2X2, SC/UPC connector.

Here you find how to configure and reset FiberHome AN5506-04-F Router.

Login to FiberHome AN5506-04-F Router

Open a web browser, such as Google Chrome, and enter the IP address of your router in the address bar.

Preconfigured wireless settings

Accessing your router's configuration interface

To connect to your router's web interface, follow these steps:

1. Turn on router
2. Establish a connection between the device and the router via network cable or Wi-Fi*
3. Open web browser
4. Enter IP address in the address bar and then confirm with ‘Enter’ key
5. Enter username and password in the open interface and confirm once more

Reset FiberHome AN5506-04-F router to factory defaults

To reset the FiberHome AN5506-04-F to its default settings, you have to do the following steps:

1. Turn on router
2. Press Factory Reset button and hold for at least 15 seconds
3. Device restarts automatically
4. Default settings have been restored

The unit will reboot automatically. Once the power light stops blinking, the unit has been reset and is ready to use. Resetting the router does not reset the firmware to an earlier version, but it will change all settings back to factory defaults.

FiberHome AN5506-04-F Router Security

Change FiberHome AN5506-04-F Default Wifi Name (SSID)

Rename your FiberHome AN5506-04-F Default Wifi Name (SSID). Some FiberHome routers come with default network names (with the name of the manufacturer). We recommend to use a different name because a default name unnecessarily identifies the make of your router, making it easier for attackers to break in.

Change FiberHome AN5506-04-F Default Password

It’s easy for a hacker to find out the manufacturer’s default password for your FiberHome AN5506-04-F router and then use that password to access your wireless network. So it’s wise to change the administrator password for your FiberHome AN5506-04-F router. When you’re deciding on your new password, try to pick a complex series of numbers and letters and try to avoid using a password that can be guessed easily.

MAC Address filtering for FiberHome AN5506-04-F router

MAC filtering allows you to limit access to your FiberHome AN5506-04-F router. To enable this feature, enter into your FiberHome AN5506-04-F router the 12-character MAC ID of each computer that will connect to your network. Be sure to update this information if you add or remove devices.

Disabling Broadcast SSID for FiberHome AN5506-04-F router

FiberHome AN5506-04-F router transmits your Wi-Fi network ID (the so-called SSID) to everyone. This may be changed at will by unchecking the corresponding box in the settings. Then your network will not be so easily hacked. However, as a compromise, you will have to enter the SSID every time that you connect a device to the network. This step is not mandatory.

MAC Address filtering for FiberHome AN5506-04-F router

MAC filtering allows you to limit access to your FiberHome AN5506-04-F router. To enable this feature, enter into your FiberHome AN5506-04-F router the 12-character MAC ID of each computer that will connect to your network. Be sure to update this information if you add or remove devices.

Where are you placing the FiberHome AN5506-04-F router in the house?

You wouldn’t think about this at first, but where you place your FiberHome AN5506-04-F also has a bearing on your security.

Place the FiberHome AN5506-04-F router as close as possible to the middle of your house. The first benefit is that all the rooms in your house have the same access to the Internet. The second benefit is that you don’t want to have your wireless signal range reach too much outside your house, where it can be easily intercepted by cybercriminals.

For this reason, don’t place your FiberHome AN5506-04-F router next to a window, since there’s nothing to obstruct the signal going outside your house.

English firmware Fiberhome An5506-04B Splicer Gpon Box Ftth ONU ONT

1.GPON uplink,support ITU-T G.984;
2.Support Ethernet speed control mode,MDI/MDIX auto adapting mode,Pause stream control mode;
3.Support customer Ethernet looping diagnosis.
4.Support DHCP Option60 location log uploading.
5.Support PPPoE+.
6.Support H.248,MGCP and SIP.
7.Support IGMP Snooping.
8.Support STP/RSTP.
9.Support AES-128 data encryption in GPON mode.
10.Apart from AN 5506-04 B5,AN 5506-04 B5G supports up to 1 G download speed.(B5 only supports up to 100 mb)

AN5506-4-B user interface: 4 gigabit ethernet+2 telephone ports

Dimension:210×149×32.5(Height×Width×Depth by mm)
Power input:DC 12V
Power comsumption:Less than 15W
Working temperature:-10~45℃
In-stock temperature:-30~60℃
Humidity:10~90%
Net weight:About 650g